انیگما 2 برای رسیور XDSR420HD.

 انیگما 2 برای رسیور XDSR420HD  .  با جزییات کامل

   
   HDMU Enigma-2
                                                                                                                                                                                                                                      


                                                                                                                                                                                                                                                Oscam 1.20 : Added  
                                                                                                                                                                                                         
-Username for Oscam Webif : root

-Password for Oscam Webif : oscam

-Port for Oscam Webif : 8888

To configure CCcam in Oscam, open any Internet Webbrowser in Computer, and type type http:// and then IP address of your receiver and port number

Example : برای مشاهده لینک ها ثبت نام کنید و یا وارد شوید and hit enter, pop-up will ask for Username and Password


Short Instruction for Installing E2
1. update the boot loader to use USB booting.

2. input uImage and root.img to a good quality USB memory stick.

4. connect the USB memory stick to the receiver.

5. press CHANNEL DOWN KEY in the front panel, and then turn on the receiver by A/C power button in rear panel.

6. the front panel will display ON or OFF.

* ON means booting from USB memory stick is activated.

- If the usb memory stick of E2 image is connected to the receiver, the receiver will boot E2 image from USB memory stick.

- If the usb memory stick of E2 image is NOT connected to the receiver, the receiver will boot the Xcruiser from the intenal memory.

* OFF means booting from USB memory stick is NOT activated, so it will boot only Xcruiser from internal memory.
* ON/OFF will be changed to each other by pressing CHANNEL DOWN KEY in the front panel when you turn on the receiver.



FTP Username and Password
Username :- root
Password :- dreambox